Two-fold sofa bed mechanism with a quick opening system. The Otello 18 Electro-Welded model allows the use of mattresses with a height of 18/20 cm and a length of 195/199 cm, providing a bed base with maximum comfort. The 30 mm tubular structure and high-resistance linkages ensure solidity and reliability. The mechanism has obtained CATAS CERTIFICATION: Vertical fatigue strength - Vertical static load EN 1725:1998; Mechanism durability test EN 13759:2012 (20,000 cycles - Hospitality); Seat and back fatigue strength EN 1728:2012+AC:2013; Vertical fatigue strength of the base ISO 19833:2018,
- TUBES. The mechanism is made of round, square, and rectangular profiled tubes in DC01 steel, welded and calibrated, produced according to EN 10305-3 standard, for furniture use, in various sections 20x20, 20x10, from Ø16 to Ø30 and thicknesses from 1.2 to 1.35 mm.
- LEVERS. The levers that make up the mechanism are made of pickled DD11 steel, free of surface irregularities, mechanically stamped. Thickness is 4.5 mm, steel produced according to UNI EN 10204 and 10111 standards.
- SPRINGS. The springs used are extension springs of various sizes, made of silicon spring steel with high carbon content and high yield strength. Finish: white galvanized or black burnished. Standard UNI EN ISO 13906.
- ELECTRO-WELDED BED BASE. The sleeping surface ensures continuity between the three different panels that compose it. The panels, made of electro-welded mesh, are supported by seven steel tubes Ø25, Ø30. The electro-welded mesh panels are made with Ø3.8 mm steel wire, projection welded electrically with horizontal and vertical spacing of approximately 70 mm.
- ELECTRO-WELDED SEATING. The sofa seat corresponds to the final section of the bed base and is made with electro-welded mesh panels. Specifically, Ø3.8 mm steel wire is used, projection welded electrically with horizontal and vertical spacing of approximately 70 mm. More uniform and firmer seating;
- PAINTING. The finish is Metallic Gunmetal color, made with thermosetting powder based on epoxy and polyester resins. Oven-cured at 280°, it has a glossy decorative effect and mechanical resistance to scratches and abrasion. The mechanism has obtained the SALT SPRAY RESISTANCE TEST certification ISO 9227:2017. The coating is intended for indoor use.
